Today we will show you how to splice an awning using the 8' MX57. Our client Leo who lives just a few miles away called in with a broken awning. We though it would make a great case study to demonstrate just how easy it is to repair a broken awning roller tube using the MX57.
We hope you enjoy this short video. For additional information on tightening the tention spring be sure to watch our other videos (found on youtube) because that part is very dangerous and should only be done by an experienced, trained professional.
Many shops can install the MX57 for you, all you need to do is ask. It normally takes about 1 to 2 hours and in Leo's case he called around and had estimates of over $800 to replace his broken awning roller tube. The worst part is...he would have ended up with a new tube that was no stronger than the one he started out with. This means he would only be one good rain away from having a broken awning.
VIDEO SHOWING THE SLICE & DICE REPAIR METHOD
Most awnings can only hold up to a couple hundred pounds of water. When you install the MX57, your awning roller tube will not break even up to 1000 lbs of weight.
Once you install the MX57, your awning will not break, bend, or bow.
Please feel free to visit us on our website or call us for additional informaiton. When you call ask for CJ who is the inventor and patent holder for the MX57.
We look forward to answering any of your questions.You can reach us at Monday - Friday 9a -5p Eastern
5510 Carmack Road Tampa, FL 33610
Tel (813) 622-7796
Additional MX57 Basic Installation Video